Panasonic KX-T2378JXW operating instructions Call Restriction, To set the call restriction

Page 29

PQQX13204YA-03 01.11.28 8:36 AM y [ W 29

Ò

Call Restriction

You can prevent the unit from dialing phone numbers beginning with speciﬁed digit(s) (1 digit or 2 digits). Phone numbers with the restricted leading digits cannot be dialed out.

To set the call restriction

Make sure that a call is not put on hold.

1

2

3

Press (PROGRAM).

Press (MUTE).

Press (1).

³If you use “1111” as aPIN code (factory set), the display on the right will be shown. There is no need to enter a PIN code. Go to step 6.

³After the PIN code is changed, “– – – –” will be displayed.

4	Enter the PIN code (p. 27).
	(Ex. Your PIN code is “1234”.)
5	Press (PROGRAM).

	³If a wrong PIN code is entered, 3 beeps
	will sound. Enter a correct PIN code and

	press (PROGRAM).
	³The current setting is displayed. (Ex. “67”
	is entered as the restricted digits.)
6	Enter the number(s) (1 digit or 2 digits)

	you want to restrict ((0) to (9)). (Ex. “12”
	is entered as the restricted digits.)

	³If you enter a wrong number, enter a correct number.
	³To change restricted digits from 2 digits to 1 digit, press ($) for 2 digits to
7	change to “– –” and enter 1 digit.
	Press (PROGRAM).
	³A long beep sounds.

³The unit will return to the standby mode.

³If your unit is connected to a PBX, this function may not operate. Contact your PBX supplier for more information.

When dialing a phone number with the restricted leading digit(s), the dialed number will ﬂash on the display, but not dialed out.

Advanced Operation

29

Image 29

Contents Model No. KX-T2378JXW Before Initial Use Accessories includedFor your future reference Serial No Date of purchaseContents Volume Indicator p , 17Location of Controls Buttons p MIC Microphone p , 17 Mute Button p Hold Button pPause Button p Redial Button p Flash Button p One-Touch Auto Dial Buttons p Tone Button p Display pButton p Display Installing the Batteries SettingsConnecting the Handset Press down in the direction Arrow and open the coverTo connect a two-line telephone jack Connecting the Telephone Line CordTo connect two single-line telephone jacks Connect the telephone line cords to the unit as followsIf you use the unit only as a single-line telephone Connecting a Communication DeviceProgramming Summary of Preparations Press Program to store the settingMake sure that a call is not put on hold Press MuteTo select Pulse, press2 To select Tone, press1 Selecting the Dialing ModeYou can select AM/PM or 24-hour clock by programming Time AdjustmentSelecting the Ringer Volume Setting the LCD ContrastPress Press 1 toLocks, so the tab holds the handset Wall MountingWall Template Making Calls Using the handsetUsing the speakerphone To put a call on hold To redial the last number dialedTo release the hold Automatic RedialAnswering Calls What the line indicator meansEx If you are using LINE1 Using the Other Line During a ConversationDuring a conference call Ex If you are using LineConference Call Storing Phone Numbers in Memory Speed DialerEnter a phone number, up to 22 digits Press a memory station number 0 toTo erase a stored number Dialing a Stored NumberPress one of the one-touch auto dial buttons One-Touch DialerTo store in an Upper memory location Memory location, press the one-touch To store in a Lower memory locationIf the phone number is in an Upper Memory card From an Upper memory locationFrom a Lower memory location For Call Waiting Service Users Special FeaturesHow to Use the Pause Button Temporary Tone DialingFlash Button Muting Your ConversationSelecting the ﬂash time Press Mute while talkingEnter a new PIN code using a 4-digit Setting the PIN CodeEnter the current PIN code Ex is enteredDial Lock To cancel the dial lockTo set the dial lock Enter the PIN code pEnter the PIN code p Ex. Your PIN code is Call RestrictionTo set the call restriction Connecting the Optional Headset to the Unit Using the Optional HeadsetTo cancel the call restriction Making/Answering Calls Make sure to install the batteriesTo adjust the headset receiver volume 4 levels Battery Precautions Battery ReplacementBefore Requesting Help Problem RemedyBefore Requesting Help ProblemRemedyInstallations Environment Safety InstructionsPQQX13204YA F1001-1111D 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan