PQQX13204YA-03 01.11.28 8:36 AM y [ W 31
Making/Answering Calls
Make sure to install the batteries.
Line Buttons and Indicators
| | | |
| | | |
| VOLUME (_), (^) | |
| (SP-PHONE/HEADSET) | and Indicator |
1 Press the line button to select the telephone line. |
2 | Press (SP-PHONE/HEADSET)to make or answer a call. |
³The line indicator lights red and SP-PHONE/HEADSET indicator flashes. |
| ³If you misdial when making a call, press (SP-PHONE/HEADSET)twice and |
| dial again. |
3 | To hang up, press (SP-PHONE/HEADSET). |
³The indicator light goes out. |
To adjust the headset receiver volume (4 levels):
While using the headset, press VOLUME (_) or (^).
³Be sure that the (CONF) button is released.
³During a conversation using the headset, you cannot switch the call to the handset by lifting it off the cradle.
³If you disconnect the optional headset during a conversation with the handset on the cradle, the call will be switched to the speakerphone.
³During a conversation using the speakerphone, you can switch the call to the headset by connecting the headset.
Model No. KX-T2378JXW
Serial No Date of purchase
Accessories included
Before Initial Use
For your future reference
Contents
Buttons p MIC Microphone p , 17 Mute Button p Hold Button p
Indicator p , 17
Volume
Location of Controls
Button p
One-Touch Auto Dial Buttons p Tone Button p Display p
Pause Button p Redial Button p Flash Button p
Display
Press down in the direction Arrow and open the cover
Settings
Installing the Batteries
Connecting the Handset
Connect the telephone line cords to the unit as follows
Connecting the Telephone Line Cord
To connect a two-line telephone jack
To connect two single-line telephone jacks
If you use the unit only as a single-line telephone
Connecting a Communication Device
Press Mute
Press Program to store the setting
Programming Summary of Preparations
Make sure that a call is not put on hold
To select Pulse, press2 To select Tone, press1
Selecting the Dialing Mode
You can select AM/PM or 24-hour clock by programming
Time Adjustment
Press 1 to
Setting the LCD Contrast
Selecting the Ringer Volume
Press
Wall Template
Wall Mounting
Locks, so the tab holds the handset
Using the speakerphone
Using the handset
Making Calls
Automatic Redial
To redial the last number dialed
To put a call on hold
To release the hold
Answering Calls
What the line indicator means
Ex If you are using LINE1
Using the Other Line During a Conversation
Conference Call
Ex If you are using Line
During a conference call
Press a memory station number 0 to
Speed Dialer
Storing Phone Numbers in Memory
Enter a phone number, up to 22 digits
To erase a stored number
Dialing a Stored Number
To store in an Upper memory location
One-Touch Dialer
Press one of the one-touch auto dial buttons
If the phone number is in an Upper
To store in a Lower memory location
Memory location, press the one-touch
From a Lower memory location
From an Upper memory location
Memory card
Temporary Tone Dialing
Special Features
For Call Waiting Service Users
How to Use the Pause Button
Press Mute while talking
Muting Your Conversation
Flash Button
Selecting the flash time
Ex is entered
Setting the PIN Code
Enter a new PIN code using a 4-digit
Enter the current PIN code
Enter the PIN code p
To cancel the dial lock
Dial Lock
To set the dial lock
To set the call restriction
Call Restriction
Enter the PIN code p Ex. Your PIN code is
To cancel the call restriction
Using the Optional Headset
Connecting the Optional Headset to the Unit
To adjust the headset receiver volume 4 levels
Make sure to install the batteries
Making/Answering Calls
Battery Precautions
Battery Replacement
Before Requesting Help
Problem Remedy
Before Requesting Help
ProblemRemedy
Installations Environment
Safety Instructions
PQQX13204YA F1001-1111D
62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan