Preparation
Battery performance
After your Panasonic battery is fully charged, you can expect approximately the following performance:
Operation | Operating time |
While in use | Up to 5 hours |
(talking) |
|
|
|
While not in use | Up to 11 days |
(standby)*1 |
|
While using the | Up to 3 hours |
Clarity Booster |
|
feature (page 21) |
|
|
|
*1 Handset is off the base unit or charger but not in use.
Note:
L Battery power is consumed whenever the handset is off the base unit or charger, even when the handset is not in use. The longer you leave the handset off the base unit or charger, the shorter you can actually talk on the handset. Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use.
L Once the battery is fully charged, you do not have to charge it again until “Recharge battery” is displayed or 7flashes. This will maximise the battery life.
Battery replacement
If battery performance diminishes, make sure you have cleaned the charge contacts and fully charged the battery. The battery needs to be replaced if any of the following are displayed after a few phone calls even when you have fully charged the battery.
–“Recharge battery”
–7(flashing)
–“Charge for 6h”
–8
L Use only the rechargeable Panasonic battery noted on page 5.
1 Release the battery cover latch and lift the cover open.
2 Replace the old battery with a new one, and close the cover (see page 11 for battery installation).
13