Panasonic KX-TG5838AL, KX-TG5839AL Programming via direct commands, Direct commands chart

Programmable Settings

Programming via direct commands

You can also programme most features using “direct commands”—special codes that take you directly to the feature you wish to programme and allow you to select the desired setting. There is no need to scroll through the unit’s menus.

Details of each feature can be found on the corresponding pages.

1

2

3

4

5

Press {MENU}.

Enter the desired feature code (shown below).

Enter the desired setting code (shown below).

L This step may vary depending on the feature being programmed.

Press {Save}.

Press {OFF} to exit programming mode.

Direct commands chart

Feature	Feature code	Setting code	Page
Ringer volume	{1} {1}	{1}: Low {2}: Medium	page 34
		{3}: High {0}: Off
Ringer tone	{1} {2}	{1}–{3}: Tone pattern 1–3	page 35
		{4}–{7}: Melody pattern 1–4
Interrupt tone	{1} {3}	{1}: On {2}: 2 times {0}: Off	page 35
Message play	{2}	–	page 45
Date and time	{4}	Go to step 3 on page 17.	page 17
Voice enhancer	{5}	{1}: On {0}: Off	page 36
Dial lock	{6}	Go to step 3 on page 38.	page 38
LCD contrast	{0} {1}	{1}–{6}: Level 1–6	page 36
Key tone	{0} {2}	{1}: On {0}: Off	page 38
Auto talk	{0} {3}	{1}: On {0}: Off	page 36
Set area code	{0} {4}	Go to step 4 on page 37.	page 37
Set dial mode	{0} {5} {1}	–	page 58
Set recall time	{0} {5} {2}	{1}: 700 ms {2}: 600 ms	page 37
		{3}: 400 ms {4}: 300 ms
		{5}: 250 ms {6}: 110 ms
		{7}: 100 ms {8}: 90 ms
Set line mode	{0} {5} {3}	{1}: A {2}: B	page 37
Ring count	{0} {6} {1}	{2}–{7}: 2–7 rings	page 49
		{0}: Toll saver

40