Preparation
Setting the date and time
Set the date and time so that the unit will announce the day and time each message was recorded by the answering system (page 42) when you play back messages.
1 Press {MENU}.
2 Scroll to “Date and time” by pressing {V} or {^}, then press {>} or {Select}.
Date and time
KBack dB SelectL
3 Enter the current day, month, and year by selecting 2 digits for each. Example: 15 June, 2005
Press {1}{5} {0}{6} {0}{5}.
Date:31.12.2005
Time:12:00 AM
KAM/PM SaveL
4 Enter the current hour and minute (12- hour clock format) by selecting 2 digits for each.
Example: 9:30 PM
Press {0}{9} {3}{0}.
Date:15.06.2005
Time:12:00 AM
KAM/PM SaveL
5 Select “AM” or “PM” by pressing {AM/ PM}.
Date:15.06.2005
Time:09:30 AM
KAM/PM SaveL
6 Press {Save}.
L When the date and time are set, E disappears from the base unit display.
L If the handset beeps 3 times, the date and time were not set correctly. Enter the correct digits.
7 Press {OFF}.
Note:
L If you make a mistake when entering the date and time, press {<}, {>}, {V}, or {^} to move the cursor, then make the correction.
L If a power failure occurs, Ewill flash to indicate the date and time must be set again.
To confirm the date and time
Repeat steps 1 and 2. Press {OFF} when finished.
Time adjustment (Caller ID subscribers only)
When calls are received, Caller ID will automatically adjust the date and time (including daylight saving time).
L If you have not set the date and time manually, Caller ID will not adjust the date and time.
L You can turn this feature off (page 39).
17