Answering System Features
*1 If pushed within the first 5 seconds of a message, the previous message will be played.
*2 To resume operation, enter a remote command within 15 seconds, or the voice guidance will start.
Turning on the answering system remotely
If the answering system is off, you can turn it on remotely.
1 Dial your phone number.
2 Let the phone ring 15 times.
L The unit will answer your call with the greeting message.
L You can hang up, or if you call from a touch tone phone, you can enter your remote code and begin remote operation (page 47).
Skipping the greeting message to leave a message
You can leave a message just as any outside caller can. Call your phone number, then press {*} to skip the greeting message and record your message after the beep.
Answering system settings
Remote code
A remote code must be entered when operating the answering system remotely. This code prevents unauthorised parties from listening to your messages remotely. Store any
1
2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.
3 Scroll to “Set answering” by pressing {V} or {^}, then press {>}.
4 Scroll to “Remote code” by pressing {V} or {^}, then press {>}.
5 Select the desired remote code by entering a
6 Press {Save}, then press {OFF}.
Note:
L To confirm the remote code, repeat steps 1 to 4. Press {OFF} when finished.
48