![](/images/new-backgrounds/1141784/141784111x1.webp)
Useful Information
Error messages
If the unit detects a problem, one of the following messages will be displayed on the handset.
Display message | Cause & solution |
Busy | L The called handset is in use.*1 |
| L The handset you tried to copy phonebook items to is in |
| use.*1 |
| L The handset you are calling is too far from the base unit.*1 |
Error!! | L When you tried to register the handset, the handset and |
| the base unit could not link for some reason, such as |
| interference from electrical appliances. Move the handset |
| and the base unit away from the electrical appliances and |
| try again. |
| L The other handset tried to send phonebook items to you |
| but there was an error. Have the other handset user re- |
| send the items to you (page 24).*1 |
| L The entered password was wrong in programming dial |
| lock. Enter the correct password. |
|
|
L When the phonebook item(s) was(were) sent to another | |
Phonebook full | handset, the handset’s phonebook memory was full and |
| copying stopped. Press {OFF} to exit. Erase items from |
| the other handset’s phonebook (page 23). When |
| phonebook memory is available, you can copy all |
| phonebook items (page 25) or individual items one by one |
| (page 24).*1 |
No link to base. | L The handset has lost communication with the base unit. |
Move closer to | Move closer to the base unit, and try again. |
base, try again. | L Confirm that the base unit’s AC adaptor is plugged in. |
| L Raise the base unit antennas. |
| L The handset’s registration may have been cancelled. Re- |
| register the handset (page 38). |
|
|
Phonebook full | L There is no space to store new items in the phonebook. |
| Erase unnecessary items (page 23). |
|
|
No items stored | L Your phonebook or redial list is empty. |
|
|
Please lift up | L A handset button was pressed while the handset was on |
and try again. | the base unit or charger. Lift the handset and press the |
| button again. |
|
|
System is busy. | L The handset has lost communication with the base unit. |
Please try again | Move closer to the base unit and try again. |
later. | L More than one unit is in use. Try again later.*1 |
| L Another user is listening to messages. Try again later. |
|
|
Dial locked | L Dial lock is turned on. To turn it off, see page 38. |
|
|
*1 |
|
56