Unisys EFP9800 manual Select Print Direction in Page Mode, Command, Settings Not Used in Page Mode

EFP9800 ESC/POS Commands

Command

Select Print Modes (1B 21)

Select Print Modes (1B 22)

Select Bit Image Mode (1B 2A)

Set/Cancel Emphasized Mode (1B 45)

Set/Cancel Double-Strike Mode (1B 47)

Set/Cancel 90 Degree Clockwise Rotation (1B 56)

Select Justification (1B 61)

Set/Cancel Upside Down Printing (1B 7B)

Print Downloaded Bit Image (1D 2F 00)

Set Left Margin (1D 4C)

Set Printable Area Width (1D 57)

Select Printing Position of HRI Characters (1D 48)

Select Pitch of HRI Characters (1D 66)

Select Height of Bar Code (1D 68)

Print Bar Code (1D 6B)

Select Horizontal Size of Bar Code (1D 77)

Setting(s) Not Used in Page Mode

Double-Strike, All 7 x 7 fonts

All 7 x 7 fonts

Double Density

All

All

All

All

All

Double Density

All

All

All

All

All

All

All

Select Print Direction in Page Mode

Selects the printing direction and start position in page mode. See the illustration. Default for n is 0. For more information see “ Page Mode” later in this section.

•The command is valid only in page mode.

•The command is ignored if the value of n is out of the specified range.

•The command can be sent multiple times so that several different print areas, aligned in different print directions, can be developed in the printer’s page buffer before being printed by the Eject Slip command (0C).

3255 4073– 002 6– 17