Unisys EFP9800 manual Ordering Paper and Supplies, Receipt/Journal Paper, Slips and Forms

About the EFP9800 Printer

Ordering Paper and Supplies

The following section lists the paper , supplies, and documentation available for order.

Receipt/Journal Paper

Item	Type		Number
One-Ply	Receipt or journal	40-1004-874
	150 feet
Two-Plies	Receipt/journal	40-1005-871
	95 feet

Slips and Forms

The EFP9800 printer prints on single- or multiple-part slips in the slip station. Slips must meet the following requirements (the receipt is included as one or two of the parts depending if it is one-ply or two-ply):

Minimum Slip Size

Maximum Slip Size

Total thickness

Number of parts

2.75inches (69.8 mm) wide by 5.0 inches (127 mm) long

Or

5.0inches (127 mm) wide by 2.75 inches (69.8 mm) long

8.5inches (215.9 mm) wide by 11.69 inches (297 mm) long

Single-part slips: 0.003 inches (0.076 mm) (minimum)

Multiple parts: 0.014 inches (0.355 mm) (maximum—includes the receipt)

Up to a maximum of five parts (the receipt is included as one or two parts)

Note: If card stock is present, it should be the bottom part. If multiple-part slips are used, the double-strike mode must be used to ensure that all parts are printed on clearly. Contact your sales representative to order slips and forms.

3255 4073–002 1–5