Unisys EFP9800 manual Set Absolute Starting Position, Print Mode, Per Line 5 x Per Line 7 x

EFP9800 ESC/POS Commands

Select Print Mode(s) (for Windows™ Printer Drivers)

Selects the print mode(s) specified by the value of n as outlined below. The default is 1. This command is intended for use with Windows printer drivers developed with the Windows unitool. This command is nearly identical to Select Print Mode(s) (1B 21) except that the bits for Double-Strike and Underline are ignored.

Hexadecimal	Decimal	ASCII
1B 22 n	27 34 n	ESC “ n
				Value of n in Hexadecimal
Print Mode			33/35/42 Characters		40/42/51 Characters
			per Line (5 x 9)		per Line (7 x 7)
Standard		00			01
Double-High		10			11
Double-Wide		20			21
Double-High and Double-Wide		30			31

Note: Underlines cannot be printed for 90 degree clockwise rotated characters or for spaces set by the Horizontal Tab, Set Absolute Starting Position, or Set Relative Print Position commands.

Note: In page mode, the 7 x 7 font (40/42/51 characters/line) cannot be used.

Set Absolute Starting Position

Sets the print starting position from the beginning of the line, in the fundamental calculation pitch. The distance (in inches) from the start of the line is calculated as: [(n1 + n2 x 256) x (fundamental calculation pitch)]. See the Set Fundamental Calculation Pitch command (1D 50).

Hexadecimal	Decimal	ASCII	Value of n1	Value of n2
1B 24 n1 n2	27 36 n1 n2	ESC $ n1 n2	0-255	0-255

6– 10 3255 4073– 002