EFP9800 ESC/POS Commands
3255 4073–002 6–39
Set/Cancel 90 Degree Clockwise Rotation
Starts or stops 90 degree clockwise rotated printing. Underlining may be on in
rotated mode, but characters are not underlined.
The command is ignored when n is out of range.
Hexadecimal Decimal ASCII Value of n
1B 56 n 27 86 n ESC V n 0 = Cancel 90 degree clockwise rotati on (Default)
1 = Start 90 degree clockw ise rotation
(1-dot character spacing)
The settings do not apply in page mode.
Select Character Code Table
Selects the character code table specified by the value of n. The command is
ignored if n is out of range.
Hexadecimal Decimal ASCII
1B 74 n 27 116 n ESC t n
Value of n Character Code Table
0 (default) Code Page 437 (PC US)
1 Code Page 850 (PC Multilingual)
2 Code Page 852 (Eastern European)
3 Code Page 865 (Nordic Languages)
254 Space Page
255 Space Page
Set/Cancel Upside Down Printing
Starts or stops upside down printing. In upside down printing, the printer
rotates the print line 180 degrees and then prints it.
The command is only effective at the beginning of a line.
Hexadecimal Decimal ASCII Value of n
1B 7B n 27 123 n ESC { n 0 -255
The settings do not apply in page mode.