Unisys manual EFP9800 ESC/POS Commands Eject Slip, Carriage Return

EFP9800 ESC/POS Commands

Eject Slip

Prints the data in the buffer and ejects the slip.

Hexadecimal Decimal ASCII

0C 12 FF

Standard Mode

•Enabled only when slip is selected for printing.

•Slip is ejected to the length set by the Set Slip Eject Length command (1B 43). If this length is not set, the slip is completely ejected.

•Receipt or journal paper from the paper roll is not ejected even if it is also selected.

•After the slip is ejected, the receipt or journal paper is selected for printing.

•Slips are ejected forward only.

Page Mode

The processed data is printed and the printer returns to standard mode. The developed data is deleted after being printed. For more information see “ Page Mode” later in this section.

Carriage Return

Hexadecimal Decimal ASCII

0D 13 CR

Standard Mode

Prints one line and sets the print starting position to the beginning of the line. Does not feed the paper.

Page Mode

Sets the print starting position to the beginning of the line. For more information see “ Page Mode” later in this section.

6– 6 3255 4073– 002