Unisys manual EFP9800 ESC/POS Commands Enable/Disable Paper Feed Button, Print and Feed n Lines

EFP9800 ESC/POS Commands

Enable/Disable Paper Feed Button

Enables or disables the Paper Feed button.

Hexadecimal	Decimal	ASCII
1B 63 35 n	27 99 53 n	ESC c 5 n

Note: Only the lowest bit of n is effective. When n is even, the paper feed button is enabled and when n is odd, the paper feed button is disabled.

Print and Feed n Lines

Hexadecimal	Decimal	ASCII	Value of n
1B 64 n	27 100 n	ESC d n	0 - 255

The maximum paper feed length is 40 inches. When the value of n x line spacing is greater than 40, the paper feed length is set to 40 inches.

Standard Mode

Prints the data in the print buffer and feeds n lines. Sets the print starting position to the beginning of the line. Line spacing is not affected by this command.

Page Mode

Sets the print starting position to the beginning of the nth line down from the current line (equivalent to doing n line feeds). For more information see “ Page Mode” later in this section.

Set Slip Waiting Time

Sets the time (in m minutes) that the printer waits for a slip to be inserted into the slip station and the time (n x 0.1 seconds) for the printer to close the platen and start printing once the slip has been inserted.

If a slip is not inserted in the time specified, the receipt/journal paper is selected for the next function. If m = 0, the printer waits forever for a slip to be inserted.

3255 4073– 002 6– 25