Unisys EFP9800 manual Print Each Character in the Ascii Character Set

Diagnostics and Print Tests

Print Each Character in the ASCII Character Set

This test produces a printout of each character in the ASCII character set, including all code pages, emulations, and character types (single-wide, double- wide, and so forth). You can set the test to cycle continuously, or to restart when you press the Paper Feed button.

1.Turn the printer off.

2.Turn the printer to the back to access the DIP switches and write down the current switch settings.

3.Set the DIP switches to one of the following settings:

To print each character in the ASCII character set (continuous printing):

Switch	Switch	Switch	Switch	Switch	Switch	Switch	Switch
1	2	3	4	5	6	7	8
ON	OFF	N/A	OFF	ON	ON	N/A	N/A

To print each character in the ASCII character set (Restart test by pressing the Paper Feed button):

Switch	Switch	Switch	Switch	Switch	Switch	Switch	Switch
1	2	3	4	5	6	7	8
ON	OFF	N/A	OFF	ON	OFF	N/A	N/A

4.Turn the printer back on to begin printing the test.

5.Turn the printer off to stop the test.

6.Turn the printer off and reset the DIP switches to what they were when you started.

For normal operation settings, see “Setting Switches” in section 5.

7.Turn the printer back on to begin normal operation.

3–30 3255 4073–002