Unisys EFP9800 manual Select Print Papers, Paper Type Status, Bit Paper Type

EFP9800 ESC/POS Commands

The command is effective only at the beginning of a line. It is ignored when n is out of range.

Hexadecimal	Decimal	ASCII	Value of n
1B 61 n	27 97 n	ESC a n	0	= Left Justify (default)
			1	= Center
			2	= Right Justify

The settings do not apply in page mode.

Select Print Paper(s)

Selects the paper for printing. (See the following table.) The command is effective only at the beginning of a line. It is ignored when n is out of range. The default is n = 1.

Hexadecimal	Decimal	ASCII
1B 63 30 n	27 99 48 n	ESC c 0 n

		Paper Type Status
Bit	Paper Type	0	1
0	Receipt/Journal Paper	Disabled	Enabled
1	Receipt/Journal Paper	Disabled	Enabled
2	Slip	Disabled	Enabled
3	Validation	Disabled	Enabled
4-7	Undefined

6– 22 3255 4073– 002