Unisys EFP9800 manual Changing Receipt Paper

Operating the Printer

Changing Receipt Paper

Note: Use these instructions if you are printing receipts only. If you are printing both receipts and a journal (record of transactions), or a journal only, see “Changing Receipt/Journal Paper” later in this section.

Note: All EFP9800 Series printers have a receipt journal take up spool assembly factory installed that is not always required or utilized by the client.

If the receipt take up assembly is not used, an occasional noise will occur as the take up roller assembly rotates.

The receipt take up spool has a spring-loaded roller that allows easy loading. However, if the receipt take up capability is not being used the spring loaded roller shaft will spring upwards and hit the printer top cover once per revolution.

In cases where the receipt take up assembly is not being used it can be secured in a closed position so that it will not hit the top cover during printing to eliminate the occasional nuisance noise.

A small piece of tape or a rubber band can be used to keep the take up roller assembly in a closed position at all times.

3255 4073–002 2–3