EFP9800 ESC/POS Commands

Cancel Print Data in Page Mode

Deletes all the data to be printed in the “ page” area. Any data from the previously selected “ page” area that is also part of the current data to be printed is deleted.

This command is only used in page mode. For more information see “ Page Mode” later in this section.

Hexadecimal Decimal ASCII

18

24

CAN

Set Right-Side Character Spacing

Sets the right-side character spacing to n x (fundamental calculation pitch). See the Set Fundamental Calculation Pitch command (1D 50). The default value is n

=0. The command is only available for the paper selected using the Select Paper for Setting Line Spacing command (1B 63 31).

Hexadecimal Decimal ASCII

1B 20 n

27 32 n

ESC SP n

For double-wide mode, the right-side character spacing is twice the normal value.

When the result of the fundamental calculation pitch is more than 32/160 inches, the command is ignored.

Standard Mode

The horizontal direction of the fundamental calculation pitch is used to set the right-side character spacing.

3255 4073– 002

6– 7

Page 97
Image 97
Unisys manual EFP9800 ESC/POS Commands Cancel Print Data in Page Mode, Set Right-Side Character Spacing