Unisys EFP9800 manual 3255

Diagnostics and Print Tests

Set Internal Switch Pack Values in NVRAM

Once you’ve chosen the emulation (in the previous section), you can specify various printer functions by setting the switches on “internal switch packs.”

Caution

The DIP switches are set at the factory to predetermined settings. Change the settings carefully to avoid changing other functions.

1.Turn the printer off.

2.Turn the printer to the back to access the DIP switches and write down the current switch settings.

3.To put the printer into Switch Entry mode, set the DIP switches to the following settings:

Switch	Switch	Switch	Switch	Switch	Switch	Switch	Switch
1	2	3	4	5	6	7	8
ON	ON	OFF	OFF	OFF	OFF	OFF	OFF

4.Turn the printer back on.

The printer is now in Switch Entry Mode as indicated by the green Online LED and the red Paper Status LED flashing. The green Slip In LED may be on or off, depending on your input at the time.

5.Set the DIP switches according to the following table to select the internal switch pack you want to use.

See the tables in the following four sections to determine the switch pack you need for the emulation you have already chosen:

•“EFP9800 ESC/POS Internal Switch Pack Settings”

•“Ithaca Peripherals Proprinter Internal Switch Pack Settings”

•“NCR 5021 Internal Switch Pack Settings”

•“EF4270 Internal Switch Pack Settings”

3255 4073–002 3–7