Unisys EFP9800 manual Micr Parsing, Micr Commands and Parsing Reread Micr Data

MICR Commands and Parsing

Reread MICR Data

Resends the unparsed MICR data (as if the parsing has not been defined) from the previous MICR sequence.

Hexadecimal	Decimal	ASCII
1B 77 52	27 119 80	ESC w P

Define Parsing Format, Do Not Save Permanently

Defines, but does not save parsing format. See “Parsing Parameter String Options” on the next page. Send this command at the start of day or use in the setup application. If no parameters are selected, parsing is not performed.

Hexadecimal	Decimal	ASCII
1B 77 70	27 119 112	ESC w p
parameters	parameters	parameters

MICR Parsing

This section describes the MICR parsing in more detail and includes several examples of useful parsing variations. It also describes how to create a parsing format and how to create and maintain an exception table.

If you would like a copy of a software utility that performs these functions rather than developing your own program using the command codes described in this section, please contact Unisys. The software utility can be used as provided or can be incorporated into your own application.

11–2 3255 4073–002