Unisys EFP9800 manual Line Feed, Hexadecimal Decimal Ascii Standard Mode

EFP9800 ESC/POS Commands

Horizontal Tabs: Skip to Next Tab Stop

Skips to the next horizontal tab stop. The command is ignored unless the next horizontal tab position has been defined. Default tab stops are every 8 columns.

Hexadecimal Decimal ASCII

099HT

Standard Mode

If there are no more tab stops before the end of a line when this command is received, the print starting position will be set to the beginning of the next line. In other words, a line feed will be performed.

Page Mode

If there are no more tab stops before the end of a line when this command is received, the print starting position will be set to the end of the current line. Any subsequent character received will cause an auto-line feed to be performed. For more information see “Page Mode” later in this section.

Line Feed

Hexadecimal Decimal ASCII

0A 10 LF

Standard Mode

Prints the data in the buffer and feeds the paper one line.

Page Mode

Sets the print starting position to the beginning of the next line. For more information see “Page Mode” later in this section.

3255 4073– 002 6– 5