Ithaca Peripherals Proprinter Emulation Commands
3255 4073–002 7–13
Set Underlining
Begins underlining. The printer continues to underline until the Cancel
Underlining (1B 2D 0) command is received.
The underline is drawn by the ninth dot.
Hexadecimal Decimal ASCII
1B 2D 31 27 45 49 ESC - 1
Select Alternative Character Set
Selects one of the following alternate character sets:
• Code Page 850 (PC Multilingual)
• Code Page 852 (Eastern European)
• Code Page 865 (Nordic Languages)
You can decide which set is selected using the internal switch pack settings. For
more information, see “Switch Entry Mode” in section 3.
Hexadecimal Decimal ASCII
1B 36 27 54 ESC 6
Select Character Set (Code Page 437)
Selects Code Page 437 (PC US).
Hexadecimal Decimal ASCII
1B 37 27 55 ESC 7
Set 12 Characters/Inch
Sets the character size to 12 characters/inch. You can change character size in
the middle of a line.
To double the width from 12 characters/inch to 6 characters/inch, use the Set
Single Line Double-Wide (0E) command. To return to single-wide characters,
use the Cancel Single Line Double-Wide (14) command.
Hexadecimal Decimal ASCII
1B 3A 27 58 ESC :