Diagnostics and Print Tests
3–6 3255 4073–002
7. Set the DIP switches to the settings for the printer or emulation you want to
emulate:
Emulation Switch
1 Switch
2 Switch
3 Switch
4 Switch
5 Switch
6 Switch
7 Switch
8
EFP9800
ESC/POS*
OFF OFF OFF OFF OFF OFF OFF OFF
IPI
Proprinter
Emulation
OFF OFF OFF OFF OFF OFF ON OFF
NCR 5021 OFF OFF OFF OFF OFF OFF OFF ON
EF4270 OFF OFF OFF OFF OFF OFF ON ON
* The EFP9800 ESC/POS includes Epson ESC/POS (in order to
emulate the Epson 370/5 printer).
For use with EFP984x Serial Interface Units Only
8. Press the Paper Feed button.
The green Slip In LED turns on. The printer emulation you selected is
stored in NVRAM.
9. Turn the printer off and reset the DIP switches to wh at they were when you
started.
For normal operation settings, see “Switch Settings” in section 5.
10. Turn the printer back on.
Use the print test to print the name of the emulation which is currently active
and the settings of the NVRAM switch packs. See “Diagnostics Print Tests” later
in this section for information about running the tests.