Unisys manual EFP9800 ESC/POS Emulation Internal Switch Pack 3, Switches 2

Diagnostics and Print Tests

EFP9800 ESC/POS Emulation: Internal Switch Pack 3, Switches 2 and 3

Switch 2	Switch 3	Description
OFF	OFF	Epson 40/33 character print zone (2.506 inches wide).
OFF	ON	Epson 42/35 character print zone (2.506 inches wide).
ON	OFF	Unisys 42/35 character print zone (3.024 inches wide).
ON	ON	Unisys 51/42 character print zone (3.024 inches wide).

EFP9800 ESC/POS Emulation: Internal Switch Pack 3, Switches 4 and 5

Switch	Settings	Description
4	OFF	Set the standard mode slip/validation right margin to 0.53 inches
		(Epson Compatible). This only applies if switch 2 is OFF (2.506 inch
	ON	print zone). Center the print zone for standard mode. Right margin set
		to 0.113 for 3.024 inch print zone or to 0.372 for 2.506 inch print
		zone.
5	OFF	Set the page mode slip/validation right margin to 0.53 inches
		(Epson compatible).
	ON	Center the print zone for page mode. Right margin set to 0.372
		inches.

EFP9800 ESC/POS Emulation: Internal Switch Pack 3, Switches 6 and 7

Switch 6	Switch 7	Description
OFF	OFF	Selects 14 lines (7.2 lines per inch) available when validation is
		selected.
OFF	ON	Selects 10 lines (7.2 lines per inch) available when validation is
		selected.
ON	OFF	Selects 6 lines (7.2 lines per inch) available when validation is
		selected.
ON	ON	Selects 4 lines (7.2 lines per inch) available when validation is
		selected.

3–10 3255 4073–002