HORIZONTAL - RIGHT

Johnson Controls Unitary Products

FIGURE 28: Horizontal Right Configuration

When drain hose routing changes are required, be sure to cap all un-used openings.

If rerouting hoses - excess length should be cut off so that no sagging loops will collect and hold condensate, which will cause the furnace to not operate.

HORIZONTAL - RIGHT

INDUCER ROTATED

1

Move pressure switch hose to this position.

2Change condensate Move pressure switch hose to this position. drain connection to

the 90° fitting

provided 3 Move condensate

drain hose to this position

HORIZONTAL - RIGHT

INDUCER AS RECEIVED (Except for 130K Model)

1Move pressure switch hose to this position.

AIRFLOW

4

Move rain gutter hose to this position

AIRFLOW

364861

21

2Change condensate drain INDUCER AS RECEIVED (Except for 130K Model)

connection to the 90°

3 Move condensate

 

 

4 Move rain gutter

fitting provided

 

drain hose to this position

 

hose to this position

 

 

-UIM-H-0712

Page 20 Page 22
Page 21
Image 21
Johnson Controls GG9S'MP, TG9S'MP Horizontal - Right Inducer Rotated, INDUCER AS RECEIVED Except for 130K Model
Page 20 Page 22

FAQ

What should be done when drain hose routing changes are required?

When drain hose routing changes are required, be sure to cap all un-used openings and cut off excess length to prevent sagging loops that collect condensate.

How should the pressure switch hose be moved in the horizontal-right configuration?

In the horizontal-right configuration, move the pressure switch hose to the designated position as indicated in the manual.

What should be done with the condensate drain connection?

Change the condensate drain connection to the 90 fitting provided and move the condensate drain hose to the specified position.
Top Page Image Contents