Page 32
Image 32
Johnson Controls TG9S'MP UIM-H-0712, Adjustment Of Manifold Gas Pressure & Input Rate, Read the inlet gas pressure

FAQ

What is the procedure for adjusting manifold gas pressure?

The procedure for adjusting manifold gas pressure involves connecting a U tube manometer to the gas valve, locating the pressure ports, and using a 3/32 2.4 mm Allen wrench to make adjustments.

How do I check for gas leakage after adjusting manifold pressure?

After adjusting the manifold pressure, you can check for gas leakage around the gas valve pressure port using an approved non-corrosive gas leak detection fluid or other non-flammable leak detection methods.

Is it necessary to remove the cap for the pressure regulator during adjustment?

Yes, the cap for the pressure regulator must be removed entirely to gain access to the adjustment screw for proper gas flow adjustment. However, loosening or tightening the cap does not directly adjust the flow of gas.