Unisys EFP9800 manual Carriage and Paper Jams, Slips, Forms, or Checks Not Feeding Properly

When Something Goes Wrong

Carriage and Paper Jams

Cause	Action
Jam in receipt/journal or slip station	Open the cover and the clamshell. Push the carriage away
	from the jam. Remove any jammed paper or other
	obstructions.
	Press the Reset button to remove error status.
	Reload the paper if necessary, and then close the cover.
	Press the Paper Feed button to make sure the paper is no
	longer jammed.
	For step-by-step paper loading instructions, see section 2.
	If this does not solve the problem, contact a Unisys-
	authorized service representative.

Slips, Forms, or Checks Not Feeding Properly

Cause

Slip, form, or check not inserted properly

Slip, form, or check skewing or catching in slip station due to a paper jam or obstruction

Action

Slips, forms, and checks must be inserted properly. For step-by-step instructions see “Validating Slips and Checks” in section 2.

When the form or slip is inserted properly, the Slip In LED is on.

If reinserting the slip, form, or check does not resolve the problem, contact a Unisys-authorized service representative.

Open the cover and the clamshell. Push the carriage away from the jam. Remove any jammed paper or other obstructions.

Press the Reset button to remove error status.

Reload the paper and then close the cover.

Press the Paper Feed button.

For step-by-step paper loading instructions, see section 2.

4–4 3255 4073–002