Unisys EFP9800 manual Character and Line Specifications, Ithaca Peripherals Proprinter Emulation

Specifications

Table 3: Character and Line Specifications

EFP9800 ESC/POS (Includes Epson ESC/POS Emulation)

Characters/	Character	Print Line	Slip Right Margin	Receipt Right	Characters
Line	Cell Size	Width	Inches (mm)	Margin	/Inch
(Columns)		Inches (mm)		Inches (mm)	(Pitch)
40	10 x 71	2.506 (63.65)	0.53 (13.46)3	0.3720	15.9
			Or 0.3720 (9.45)3	(9.45)
33	5 x 92	2.506 (63.65)	0.53 (13.46)3	0.3720	13.2
			Or 0.3720 (9.45)3	(9.45)
42	10 x 71	2.506 (63.65)	0.53 (13.46)3	0.3720	16.8
			Or 0.3720 (9.45)3	(9.45)
35	5 x 92	2.506 (63.65)	0.53 (13.46)3	0.3720	13.9
			Or 0.3720 (9.45)3	(9.45)
51	10 x 71	3.024 (76.80)	0.1130 (2.87)	.1130 (2.87)	16.5
42	5 x 92	3.024 (76.80)	0.1130 (2.87)	.1130 (2.87)	13.9
42	10 x 71	3.024 (76.80)	0.1130 (2.87)	.1130 (2.87)	13.9
35	5 x 92	3.024 (76.80)	0.1130 (2.87)	.1130 (2.87)	11.6

110 half dots wide by 7 dots high.

25 full dots wide by 9 dots high.

3The right margin for the slip/validation may be set with internal switch pack values in NVRAM using Switch Pack 3, switch 4. See “Set Internal Switch Values in NVRAM” in chapter 3 for more information about setting the character and line specifications.

Ithaca Peripherals Proprinter Emulation

Characters/	Character	Print Line	Slip Right	Receipt Right	Characters/Inch
Line	Cell Size	Width	Margin	Margin	(Pitch)
(Columns)		Inches (mm)	Inches (mm)	Inches (mm)
24	10 x 71	2.338 (59.38)	0.343 (8.71)	0.343 (8.71)	10
28	10 x 71	2.338 (59.38)	0.343 (8.71)	0.343 (8.71)	12
40	10 x 71	2.338 (59.38)	0.343 (8.71)	0.343 (8.71)	17

110 half dots wide by 7 dots high.

A–2 3255 4073–002