Unisys EFP9800 manual Clear Printer, Perform Validation Open Forms Compensation Assembly

Ithaca Peripherals Proprinter Emulation Commands

Advance to Top of Next Form

Prints the data in the data buffer and advances the paper to the top of the next receipt. The length of the advance can be set by NVRAM switches in switch pack #1. See “Set Internal Switch Pack Values in NVRAM” in section 3.

Hexadecimal Decimal ASCII

0C12FF

Carriage Return

Prints one line. Does not feed the paper unless DIP switch 3 is On. For more information, see “Switch Entry Mode” in section 3.

Hexadecimal Decimal ASCII

0D13CR

Clear Printer

Clears the print buffer and cancels the Set Single Line Double-Wide (0E) command. All other commands remain in effect.

Hexadecimal Decimal ASCII

1824CAN

Perform Validation: Open Forms Compensation Assembly

Opens the forms compensation assembly and turns on the Slip In LED. A form can now be inserted for up to 14 lines of validation printing. Before a form can be printed, the forms compensation assembly must be closed using the Perform Validation: Forms Compensation Close Assembly (1B 13) command.

When the printer senses that the form is correctly inserted (sensed by both sensors), it turns off the Slip In LED. Pressing the feed button closes the forms compensation assembly with or without the slip present.

Hexadecimal	Decimal	ASCII
1B 11	27 17	ESC DC1

7–6 3255 4073–002