Programming
Feature | Feature | Setting code | System |
| code |
| setting |
Ring color | {1}{4} | {1}: <Color1>=Amber | – |
(Ringer indicator color) |
| {2}: Color2=Green |
|
|
| {3}: Color3=Red |
|
|
| {4}: Multicolor |
|
Ring count | {0}{6}{1} | r | |
|
| {0}: Toll saver |
|
Ringer tone (Handset)*3 | {1}{2} | – | |
|
|
| |
Ringer volume (Handset) | {1}{1} | {1}: Low {2}: Medium | – |
|
| {3}: <High> {0}: off |
|
Set dial mode | {0}{5}{1} | {1}: Pulse | r |
|
| {2}: <Tone> (page 17) |
|
Set flash time*4 | {0}{5}{2} | {1}: <700ms> {2}: 600ms | r |
|
| {3}: 400ms {4}: 300ms |
|
|
| {5}: 250ms {6}: 110ms |
|
|
| {7}: 100ms {8}: 90ms |
|
Set line mode*5 | {0}{5}{3} | {1}: A {2}: <B> | r |
Time adjustment*6 | {0}{9} | {1}: <Caller ID[auto]> | r |
(Caller ID subscribers only) |
| {0}: Manual |
|
Voice enhancer | {5} | {1}: On {0}: <Off> | – |
*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*2 You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones.
*3 If you subscribe to a distinctive ring service (such as
*4 The flash time depends on your telephone exchange or host PBX. Consult your PBX supplier if necessary. The setting should stay at “700ms” unless pressing {FLASH} fails to pick up the call waiting call.
*5 Generally, the line mode setting should not be adjusted. If “Line in use” is not displayed when another phone connected to the same line is in use, you need to change the line mode to “A”.
*6 This feature allows the unit to automatically adjust the date and time setting when caller information is received. To use this feature, set the date and time first.
For assistance, please visit http://www.panasonic.com/phonehelp | 33 |