Useful Information
4 Connect the telephone line cord. Mount the unit by inserting the mounting pins into the round openings on the adaptor (for pin 2, use round cut out at the bottom of the adaptor if you are using the 4 inches phone plate), then sliding the unit down to secure it.
Connect the AC adaptor to power outlet (page 10).
LThere are two common types of wall phone plates. The distance between 1and 2may vary depending on the size of the wall phone plate installed.
1
83 mm (31/4 inches)
or
102 mm
(4 inches) 2
(120 V AC,
60 Hz)
83 mm | 102 mm |
(31/4 inches) 1 | (4 inches) |
2 |
|
To remove the wall mounting adaptor While pushing down the release levers (A), remove the adaptor (B).
A
A
B
46For assistance, please visit http://www.panasonic.com/phonehelp