Connecting the cellular phone, Connection iSET

Using a Cellular Phone with this Unit

Storing your area code (for users dialing only a 7-digit phone number to make a local call) ^

You need to add your area code when making calls*1 using a cellular line. Once you store your area code, this feature allows you to automatically add your area code to the beginning of the 7-digit phone number when making calls*1 using a cellular line.

*1 The area code is automatically added when:

–dialing a 7-digit phone number manually

–dialing a 7-digit phone number saved in the redial list

–dialing a 7-digit phone number stored in the phonebook

–dialing an edited phone number with 7 digits in the caller list

1 {MENU} i{#}{8}{0}{0}

2 Enter 3-digit area code i{SET}

Note:

LYou can store only one area code.

Connecting the cellular phone

You need to connect a registered cellular phone to the base unit in order to make or answer calls using a cellular line with this system.

Important:

LAfter connecting your cellular phone to the base unit, and if you carry your cellular phone far from the base unit (example: if you leave the house with your cellular phone) the connection will be lost. After returning within closer to the base unit’s range you need to reconnect the cellular phone to the base unit. Some cellular phones lose

connection after usage, please check the specification of your cellular phone for more details.

LWhen registering an additional cellular phone to the base unit, cellular phones already connected to the base unit lose connection. You need to reconnect the cellular phones to the base unit.

1 Press the desired CELLULAR SELECT button ({1} to {5}).

2 “Connection” i{SET}

L“Connection(OK)” is shown and the CELLULAR SELECT button is lit in yellow-green if the cellular phone is connected to the base unit.

3 {STOP}

Note:

LIn step 2, the base unit requires your cellular phone to accept the connection. Depending on your cellular phone, it may ask you if you accept the connection requirement from the base unit. Refer to the operating instructions of your cellular phone for further operations.

LAfter connecting your cellular phone to the base unit, if the cellular phone is too far from the base unit (out of the base unit's range), or there is an interference from other electrical units, the cellular phone’s connection is disconnected. We recommend you place the cellular phone closer to the base unit.

For assistance, please visit http://www.panasonic.com/phonehelp