iAnswering System
Voice memo
Recording a voice memo ^
You can use the base unit to leave a voice memo (voice message) for yourself or someone else (max. 3 minutes). This memo can be played back later, either directly with the base unit or remotely.
1 {MEMO}
2 After the base unit beeps, speak clearly about 20 cm (8 inches) away from the MIC.
3 To stop recording, press {STOP}.
Remote operation
Using a touch tone phone, you can call your phone number from outside and access the unit to listen to messages. The unit’s voice guidance prompts you to press certain dial keys to perform different operations.
Important:
LIn order to operate the answering system remotely, you must first set a remote code (page 50). This code must be entered each time you operate the answering system remotely.
Using the answering system remotely
1
2 After the greeting message starts, enter your remote code.
LThe unit plays back new messages, including memo messages.
3 After 3 seconds, the voice guidance starts. Follow the voice guidance as necessary.
4 When finished, hang up.
Note:
LYou can ignore the voice guidance and control the unit using remote commands (page 49).
Voice guidance
During remote operation, the unit’s voice guidance prompts you to press {1} to perform a specific operation, or press {2} to listen to more available operations. Operations are presented by voice guidance in the following order:
–Play back all messages
–Play back new messages
48For assistance, please visit http://www.panasonic.com/phonehelp