Using a Cellular Phone with this Unit
Ringer tone
You can change the ringer tone heard when a cellular call is received. You can change it for the handset and base unit individually.
Handset
1 {MENU} (center of joystick) if
i{SELECT}
2
3
4 Select the desired item. (Default: “Tone 3”) i{SAVE} i{OFF}
Note:
LIf you erase a customized ring for cellular call, “Tone 3” (default) is used instead of that ringer tone.
Base unit
1 {MENU} ifi{SET}
2 “Ringer for cell” i{SET} 3 “Ringer tone” i{SET}
4 Select the desired item. (Default: “Tone 3”) i{SET} i{STOP}
Selecting which unit to ring ^
You can select which handset or base unit rings when you receive a call from one of the registered cellular phones.
1 Press the desired CELLULAR SELECT button ({1} to {5}).
2
3 Select the desired unit, then press {>}. (Default: “All”)
LThe selected units are indicated by “Q”.
LTo cancel a selected unit, press {>} again.
4 {SET} i{STOP}
Answering system settings for cellular calls ^
Setting the answering system for a cellular call
This feature allows the base unit to answer cellular calls when you are not available to answer cellular calls.
Important:
LTo use this feature, you need to turn on the answering system.
LIf this feature is turned on, the base unit plays the greeting message and message is recorded.
1 {MENU} iAi{SET}
2 “TAD for cell” i{SET} 3 “TAD (cell)” i{SET}
4 Select the desired setting. (Default: “Off”) i{SET} i{STOP}
Note:
L“TAD” stands for Telephone Answering Device.
For assistance, please visit http://www.panasonic.com/phonehelp | 59 |