iAnswering System
Caller’s recording time ^
You can change the maximum message recording time allotted to each caller. “Greeting only”: The unit plays the greeting message but does not record caller messages.
1 {MENU} iAi{SET}
2 “Recording time” i{SET}
3 Select the desired setting. (Default: “3min”) i{SET} i{STOP}
Note:
LIf the message memory becomes full, the unit automatically switches to the “Greeting only” mode. New messages will not be recorded.
Recording mode ^
You can select a recording mode. Enhanced recording provides improved sound quality, but the total recording capacity is reduced.
1 {MENU} iAi{SET}
2 “Recording mode” i{SET}
3 Select the desired item. (Default: “Standard recording 60min”) i {SET} i{STOP}
Call screening ^
This feature allows you to monitor a message from the speaker when the answering system is recording the message.
1 {MENU} iAi{SET}
2 “Call screening” i{SET}
3 Select the desired item. (Default: “On”) i{SET} i{STOP}
Message alert Y
You can select whether or not the message indicator on the handset slowly flashes amber when new messages are recorded (page 46).
1 {MENU} (center of joystick) ihi {SELECT}
2 “Message alert” i{SELECT}
3 Select the desired setting. (Default: “Off”) i{SAVE} i{OFF}
Note:
LWhile message alert feature is on, battery operating time will be shortened (page 11).
For assistance, please visit http://www.panasonic.com/phonehelp | 51 |