Paradyne 8965 Configuration Using the Web Interface, Overview, Configuring Spectrum Management

Configuration Using the Web Interface

3

Overview

This chapter provides instructions on how to configure the ATM line cards using the SCP card’s web interface.

If you would like to configure the
card using . . .	See the . . .
The BAC’s TL1 Interface (when an	8620 and 8820 Broadband Access
SCP card with an ATM uplink is used)	Concentrator TL1 Interface Reference
The BAC’s router-like command line	8620 and 8820 Broadband Access
interface (when an SCP card with an IP	Concentrator Command Line Interface
uplink is used)	Reference
GrandVIEW EMS 4.1 or above	GrandVIEW EMS User’s Guide
SNMP using another EMS	8620 and 8820 Broadband Access
	Concentrator SNMP Reference

Configuring Spectrum Management

Use the Configuration - DSL General screen to enable and disable Spectrum Management. When Spectrum Management is enabled, the maximum transmit speeds and maximum transmit power are limited to meet local spectrum management guidelines.

Procedure

To enable or disable Spectrum Management:

1.Select Disable or Enable from the drop-down list.

2.For the 8985 line card, additionally select the Spectrum Management Region:

—ANSI T1417 – To select American National Standards Institute T1.417 definitions

—ANFP ND 1602 – To select Access Network Frequency Plan ND1602 definitions

3.Click on Apply.

8900-A2-GB20-30 June 2004 3-1