Paradyne and 8985, 8968, 8965, 8955 manual Adding a Slot-to-Slot Cross Connection, Scp Vpi

Page 26

3. Configuration Using the Web Interface

Adding a Slot-to-Slot Cross Connection

Procedure

To create a range of VCCs between specified slots and the SCP card:

1.On the Configuration - Cross Connect screen, click on Create Cross Connect by Slot. The Configuration - Cross Connect - Slot screen appears.

2.Enter or select the following fields:

Field

Description

 

 

Start Slot

Select from the drop-down list the first slot in a range to

 

have connections established to the SCP card.

 

 

End Slot

Select from the drop-down list the last slot in a range to

 

have connections established to the SCP card. It may be

 

the same as the Start Slot.

 

 

Start Port

Select from the drop-down list the first port in a range to

 

have a connection established to the SCP card. The

 

range of ports will be applied to all slots selected.

 

 

End Port

Select from the drop-down list the last port in a range to

 

have a connection established to the SCP card. It may be

 

the same as the Start Port. The range of ports will be

 

applied to all slots selected.

 

 

Slot VPI

Enter the VPI of this circuit.

 

 

Slot VCI

Enter the VCI of this circuit.

 

 

Segment End Point (Slot)

Select True or False from the drop-down list to signify

 

whether this connection is the segment endpoint. This

 

field determines if the port card will function as an

 

endpoint for ATM OAM loopbacks. If False, the port card

 

will loop back a cell only if its location ID matches the

 

preconfigured location ID. (See Configuring ATM Ports on

 

page 3-16.) All other loopback cells are passed to the

 

next segment.

 

 

SCP VPI

Enter the VPI of this range of VCCs.

 

 

SCP Start VCI

Enter the first VCI of this range of VCCs.

 

 

Segment End Point

Select True or False from the drop-down list to signify

 

whether this connection is the segment endpoint. This

 

field determines if the port card will function as an

 

endpoint for ATM OAM loopbacks. If False, the port card

 

will loop back a cell only if its location ID matches the

 

preconfigured location ID. (See Configuring ATM Ports on

 

page 3-16.)All other loopback cells are passed to the

 

next segment.

 

 

Upstream Profile

Select a profile for upstream traffic.

 

 

Downstream Profile

Select a profile for downstream traffic.

 

 

3-14

June 2004

8900-A2-GB20-30

Page 25 Page 27
Image 26
Page 25 Page 27
Contents ATM Line Cards Copyright 2004 Paradyne Corporation All rights reserved Contents Connector Pin Assignments DiagnosticsMaintenance Procedures Technical Specifications IndexDocument Summary About This GuideDocument Purpose and Intended Audience Product-Related Documents Document Number Document TitleAbout the ATM Line Cards ATM Line CardsEndpoint Support Features ATM Line Card FeaturesATM Features Sample Network Configurations Endpoint with Voice InterfacesSnmp Trap Support Snmp Management CapabilitiesManagement Information Base MIB Support Logging Into the Web Interface Accessing the SCP Card Web InterfaceIntroduction Help Button Ending a SessionIf you would like to configure Card using See Configuration Using the Web InterfaceConfiguring Spectrum Management OverviewConfiguring ReachDSL Ports Field DescriptionConfiguring Adsl Ports 8965 Disabled Power management is disabled Configuring Shdsl Ports Configuring Line Profiles 8955, 8965 Upstream / Far End ProfileCreating Line Profiles for Ports Configuring Alarm Threshold Profiles 8955, 8965 Downstream / Near End Alarm ProfileLoss of Signal Seconds Creating Alarm Threshold Profiles for Model Violations in a 15-minute interval equals or exceeds thisLoss of Sync Word Seconds Adding a Port-to-Port Cross Connection Configuring Cross ConnectionsDefault Mappings FieldPort B Adding a Slot-to-Slot Cross Connection SCP VPISlot SCP Card Configuring ATM Ports Configuring Traffic Profiles CdvtConfiguration Using the Web Interface June Location of ATM Line Card Information 1 Field Screen MonitoringWhat to Monitor Location of ATM Line Card Information 2 Field Screen LED is Indicating Front Panel LEDs Models 8955, 8965,Type Front Panel LEDs Model Diagnostics Lamp TestLoopback Test Model 8985 Only Maintenance Procedures Uploading and Downloading a Configuration Configuration FTP ParametersResetting the Configuration to Default Settings Resetting the Configuration to Downloaded SettingsFirmware Download Parameters Downloading and Switching FirmwareDownloading Firmware Switching Firmware Restarting the Line CardMaintenance Procedures June Connector Pins Port Tip, Ring Connector Pin Assignments8820 Telco Connector Pinouts Model 8968 Line Card Telco Connector Pinouts Connector Connector Pins Port Tip, RingTechnical Specifications Table B-1. ATM Line Card Technical Specifications 1 CriteriaTable B-1. ATM Line Card Technical Specifications 2 Criteria Index NumericsIN-2 IN-3 IN-4
Top Page Image Contents