Paradyne 8968, and 8985 manual Configuring Alarm Threshold Profiles 8955, 8965

3. Configuration Using the Web Interface

Configuring Alarm Threshold Profiles (8955, 8965, 8968)

Use the Configuration - Alarm Threshold Profiles screen to define sets of alarm thresholds that you can apply to DSL ports.

To create an alarm threshold profile for a ReachDSL or ADSL line card:

1.Click on Create New Profile. The Alarm Threshold Profile Create screen appears.

2.Enter or select the following fields:

Field	Description
Profile Name	Specify a name for this alarm profile.
Downstream / Near End Alarm Profile
Loss of Frame Seconds	SNMP trap and TL1 autonomous message are sent if the
	number of LOFS events in a 15-minute interval meets or
	exceeds the selected value (0–900 seconds, where 0
	disables the messages).
Loss of Power Seconds	SNMP trap and TL1 autonomous messages are sent if
	the number of LPRS events in a 15-minute interval meets
	or exceeds the selected value (0–900 seconds, where 0
	disables the messages).
Errored Seconds	SNMP trap and TL1 autonomous message are sent if the
	number of ES events in a 15-minute interval meets or
	exceeds the selected value (0–900 seconds, where 0
	disables the messages).
Severely-Errored Seconds	SNMP trap and TL1 autonomous message are sent if the
	number of SES events in a 15-minute interval meets or
	exceeds the selected value (0–900 seconds, where 0
	disables the messages).
Unavailable Seconds	SNMP trap and TL1 autonomous message are sent if the
	number of UAS events in a 15-minute interval meets or
	exceeds the selected value (0–900 seconds, where 0
	disables the messages).
Increasing Rate	SNMP rate change trap and TL1 autonomous message
	are sent if the current rate is greater than or equal to the
	previous rate plus this threshold (0–65535 kbps, where 0
	disables the messages).
Decreasing Rate	SNMP rate change trap and TL1 autonomous message
	are sent if the current rate is less than or equal to the
	previous rate minus this threshold (065535 kbps, where 0
	disables the messages).
Upstream / Far End Alarm Profile
Loss of Frame Seconds	SNMP trap and TL1 autonomous message are sent if the
	number of LOFS events in a 15-minute interval meets or
	exceeds the selected value (0–900 seconds, where 0
	disables the messages).

3-8 June 2004 8900-A2-GB20-30