Paradyne 8965, 8968, and 8985, 8955 manual Configuring Traffic Profiles, Cdvt

3. Configuration Using the Web Interface

Configuring Traffic Profiles

Use the Configuration - Profile Traffic Descriptor screen to define, modify, and delete ATM traffic profiles.

To create a traffic profile:

1.On the Configuration - Profile Traffic Descriptor screen, click on Create New Profile. The first Configuration - Profile Traffic Descriptor Create screen appears.

2.Select a Class of Service (CoS) from the drop-down list:

—UBR - Unspecified Bit Rate

—CBR - Constant Bit Rate

—nrt-VBR - Non-Real-Time Variable Bit Rate

—rt-VBR - Real-Time Variable Bit Rate

3.The Configuration - Profile Traffic Descriptor Create - CoS screen appears. What fields are displayed depends on the Class of Service. Enter or select:

Field	Description
Profile Name	Enter a name for this profile.
PCR	Enter a Peak Cell rate from 0 to 351566.
SCR	Enter a Sustainable Cell Rate from 0 to 351566.
CDVT	Enter a Cell Delay Variation Tolerance from 0 to 100000.
	If you enter 0, a CDVT value is automatically calculated.
MDCR	Enter a Minimum Desired Cell Rate from 0 to 351566.
MBS	Enter a Maximum Burst Size from 0 to 351566.
Tagging	Select Yes or No from the drop-down list to determine if
	tagging is allowed for this profile.
Traffic Policing	Select Yes or No from the drop-down list to determine if
	traffic policing is allowed for this profile.
Packet Discard	Select Yes or No from the drop-down list to determine if
	partial packet discards are allowed for this profile.
Shaping	Select Yes or No from the drop-down list to determine if
	shaping is allowed for this profile.

4. Click on Apply.

8900-A2-GB20-30 June 2004 3-17