Paradyne 8965, 8968, and 8985, 8955 manual Configuring Shdsl Ports

3. Configuration Using the Web Interface

Configuring SHDSL Ports (8985)

Use the Configuration - SHDSL Port screen to set parameters for a DSL port on the 8985 line card.

Procedure

To configure a DSL port:

1.Select a Port from the drop-down list and click on Select. Current values for the port are displayed.

2.Enter or select the following fields:

Field	Description
Line Circuit Name	Enter a name from 1 to 255 characters long to indicate to
	whom the port is assigned. The following values are
	reserved and cannot be used: AVAILABLE (port is not
	assigned), and FAULTY (port is faulty and can not be
	assigned).
SHDSL Line Profile Name	Enter the name of a DSL line profile to set rates for the
	port.
SHDSL Alarm Profile Name	Enter the name of a DSL alarm profile to set alarm
	thresholds for the port.
Equivalent Working Length	Specify the estimated length of the line. The length is
	used to limit transmit rates according to local spectrum
	management guidelines.
Port Status	Select Enabled, Disabled, or Reset from the drop-down
	list to determine the status of the port.

3. Click on Apply.

8900-A2-GB20-30 June 2004 3-5