Paradyne 8965, 8968, and 8985, 8955 manual Port B

3. Configuration Using the Web Interface

Field	Description
End VCI	Enter the last VCI for this side of the cross-connection.
Segment End Point	Select True or False from the drop-down list to signify
	whether this connection is the segment endpoint. This field
	determines if the port card will function as an endpoint for
	ATM OAM loopbacks. If False, the port card will loop back a
	cell only if its location ID matches the preconfigured
	location ID. (See Configuring ATM Ports on page 3-16.)All
	other loopback cells are passed to the next segment.
Port B
Slot	Select from the drop-down list the slot where the card
	associated with this port resides.
Port	Select the user port for the cross-connection.
VPI	Enter the VPI for the user side of the cross-connection.
Start VCI	Enter the first VCI for the user side of the cross-connection.
End VCI	Enter the last VCI for the user side of the cross-connection.
Segment End Point	Select True or False from the drop-down list to signify
	whether this connection is the segment endpoint. This field
	determines if the port card will function as an endpoint for
	ATM OAM loopbacks. If False, the port card will loop back a
	cell only if its location ID matches the preconfigured
	location ID. (See Configuring ATM Ports on page 3-16.)All
	other loopback cells are passed to the next segment.
Profiles
Port B to Port A Profile	Select a profile for upstream traffic.
Port A to Port B Profile	Select a profile for downstream traffic.

3. Click on Apply.

8900-A2-GB20-30 June 2004 3-13