D-Link DVG-2101S user manual Configuration, Enter or Return key

Page 11

Configuration

DVG-2101S User Manual

Configuration

Prior to using your web browser for accessing the web-based configuration utility, if DHCP is not enabled on your computer, be sure to assign a static IP address to the VoIP Telephone Adapter.

Use the computer that was last connected directly to your Cable/DSL modem. Right-click My Network Places > select Properties > right-click Local Area Connection > select Properties > double-click Internet Protocol (TCP/IP).

Set your PC’s IP address to 192.168.1.1 and the subnet mask to 255.255.255.0. The default gateway and primary DNS server IP addresses should be the LAN IP address of the DVG-2101S (192.168.1.150).

Click OK.

In order to use a web browser to configure the VoIP Adapter you must make sure it has a valid Ethernet connection to a PC or LAN via its LAN port. Access the configuration utility to check the LAN port by entering the IP Address into your web browser address field.

Open a web browser and type

http://192.168.1.150 into the

URL address box. Press the

Enter or Return key.

When you first log in, enter the Username admin and leave the Password blank.

These may be changed later.

Click the Login button.

9

Image 11

Contents DVG-2101S VoIP Telephone Adapter Table of Contents Introduction Package Contents„ NTP Features„ VPN Register LED Power LEDFront Panel Phone LEDRear Panel Reset ButtonConnecting the DVG-2101S Directly to a Modem Hardware InstallationConnecting the DVG-2101S Behind a Router Hardware Installation Enter or Return key ConfigurationStep Click Setup WizardStatic IP users have to set the DNS address Click Next Step Dynamic IP SetupInternet Setup Connection TypeStatic IP PPPoE PasswordService Name NameClone MAC Address CloneStatic Routing SIP Account List VoIP SetupNumber Phone BookTime and Date Internet Time Zone Enable Daylight Saving DatesAdvanced VoIP SettingsCall Feature Scenario Examples of Making a Conference CallSIP Setting Digit Plan Component Description Digit Plan Syntex To specify a Enter the following ResultIVR Digits InputScenario Rule Combination VoIP Adapter will do… Digit MapExample PrefixMode Min LenDial Prefix Packetization CodecPriority CodecPhone Setting DNS Server Address Host Name Username or Key Timeout StatusDynamic DNS QoS VPN Dialing out SettingsLAN Mask System MaintenanceConfiguration Times Period File Auto ProvisionSnmp for Snmp model only Log Setting Firmware Update Admin Current Password Admin New Access ControlPing Test Device Information StatusVoIP Status CDR Status VPN Status Network Status System Log Help Menu HelpConfiguration through IVR Why can’t I access the web-based configuration utility? Frequently Asked QuestionsHow can I check if my IP address is correct for logging in? What can I do if I forgot my password?Can I use my DVG-2101S on a Mgcp network? How can I set my computer to use a static IP address?Technical Specifications FCC Caution FCC EMI Statement