D-Link user manual Connecting the DVG-2101S Behind a Router

Page 9

Hardware Installation

DVG-2101S User Manual

Connecting the DVG-2101S Behind a Router

If you wish to connect your DVG-2101S behind a router, follow the steps below. After the steps are completed, your setup should look similar to the diagram below.

1.Turn off your computer.

2.Disconnect the power to the Cable/DSL modem (unplug the modem or turn off the power switch).

3.Disconnect the power to your existing router (unplug the router or turn off the power switch).

4.Unpack the Ethernet cable (blue) that came with the DVG-2101S.

5.Attach one end of this Ethernet cable to the WAN port on the rear of the DVG-2101S.

6.Attach the other end of this Ethernet cable to a LAN port on your existing router.

7.Be sure that the Ethernet cable that is plugged into the WAN port of your existing router is still plugged into your Cable/DSL Modem.

8.Unpack the phone cable (gray) that came with the DVG-2101S. Attach one end of this cable to a standard analog telephone.

9.Attach the other end of this cable to the PHONE port on the rear of the DVG-2101S.

10.Unpack the 12V DC power adapter that came with the DVG-2101S.

11.Connect the power adapter to the power connecter on the DVG-2101S.

12.Connect the other end of the power adapter to an available electrical outlet (wall socket or surge protector).

13.Reconnect the power to the Cable/DSL modem (plug in or turn on the power switch).

14.Reconnect the power to your existing router (plug in or turn on the power switch).

15.Restart your PC.

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents DVG-2101S VoIP Telephone Adapter Table of Contents Introduction Package Contents„ NTP Features„ VPN Front Panel Power LEDPhone LED Register LEDRear Panel Reset ButtonConnecting the DVG-2101S Directly to a Modem Hardware InstallationConnecting the DVG-2101S Behind a Router Hardware Installation Enter or Return key ConfigurationStep Click Setup WizardStatic IP users have to set the DNS address Click Next Step Internet Setup SetupConnection Type Dynamic IPStatic IP Service Name PasswordName PPPoEClone MAC Address CloneStatic Routing SIP Account List VoIP SetupNumber Phone BookTime and Date Internet Time Zone Enable Daylight Saving DatesVoIP Settings Call FeatureAdvanced Scenario Examples of Making a Conference CallSIP Setting Digit Plan Component Description Digit Plan Syntex To specify a Enter the following ResultIVR Digits InputScenario Rule Combination VoIP Adapter will do… Digit MapMode PrefixMin Len ExampleDial Prefix Priority CodecCodec PacketizationPhone Setting DNS Timeout Status Dynamic DNSServer Address Host Name Username or Key QoS VPN Dialing out SettingsLAN Mask Maintenance ConfigurationSystem Times Period File Auto ProvisionSnmp for Snmp model only Log Setting Firmware Update Admin Current Password Admin New Access ControlPing Test Device Information StatusVoIP Status CDR Status VPN Status Network Status System Log Help Menu HelpConfiguration through IVR Why can’t I access the web-based configuration utility? Frequently Asked QuestionsHow can I check if my IP address is correct for logging in? What can I do if I forgot my password?Can I use my DVG-2101S on a Mgcp network? How can I set my computer to use a static IP address?Technical Specifications FCC Caution FCC EMI Statement
Top Page Image Contents