D-Link DVG-2101S user manual VoIP Setup, SIP Account List

Page 20

DVG-2101S User Manual

Setup

VoIP Setup

The VoIP (Voice over Internet Protocol) Adapter can be configured to handle voice communication over the Internet. The screen shown below, along with the SIP account list and phone book pages are used to configure the basic settings to allow you to communicate with the devices that will send and receive telephone calls over the Internet.

SIP Account List

The VoIP Adapter allows you to make calls through the Internet or PSTN. You need to configure the SIP account before you can make a VoIP phone call.

Display Name Enter your display name. Every outgoing call will carry this name to the receiver and it should appear on the Caller-ID.

User Name Enter your SIP account username. The username is the part that comes before the “@” symbol. A username can be letters like in an e-mail address (e.g. account@provider.com) or numbers like a telephone number (e.g. 24680@provider.com).

Authorization

Enter the authorization name to authenticate your SIP account.

Name

This is usually the same to your SIP account’s user name.

Password

Enter the password to authenticate your SIP account.

Proxy Server

Enter the SIP proxy server’s IP address and port number in this

 

field (e.g. 192.168.0.253:5060).

Outbound

Enter the outbound proxy server IP address and port number in

Proxy Server

this field (e.g. 192.168.0.1:5060).

Expire Time

Enter the amount of time for the dial tone when the phone has

 

been lifted off the hook. At the end of this time period, if no

 

numbers have been dialed, the device will start playing the

 

busy tone.

MWI

Check the checkbox to activate MWI (Message Waiting

 

Indication) if the SIP server supports this service.

18

Page 19 Page 21
Image 20
Page 19 Page 21
Contents DVG-2101S VoIP Telephone Adapter Table of Contents Package Contents IntroductionFeatures „ NTP„ VPN Power LED Front PanelPhone LED Register LEDReset Button Rear PanelHardware Installation Connecting the DVG-2101S Directly to a ModemConnecting the DVG-2101S Behind a Router Hardware Installation Configuration Enter or Return keyClick Setup Wizard StepStatic IP users have to set the DNS address Click Next Step Setup Internet SetupConnection Type Dynamic IPStatic IP Password Service NameName PPPoEMAC Address Clone CloneStatic Routing VoIP Setup SIP Account ListPhone Book NumberInternet Time Zone Enable Daylight Saving Dates Time and DateAdvanced VoIP SettingsCall Feature Examples of Making a Conference Call ScenarioSIP Setting Digit Plan Digit Plan Syntex To specify a Enter the following Result Component DescriptionDigits Input IVRDigit Map Scenario Rule Combination VoIP Adapter will do…Prefix ModeMin Len ExampleDial Prefix Codec PriorityCodec PacketizationPhone Setting DNS Server Address Host Name Username or Key Timeout StatusDynamic DNS QoS Dialing out Settings VPNLAN Mask System MaintenanceConfiguration Auto Provision Times Period FileSnmp for Snmp model only Log Setting Firmware Update Access Control Admin Current Password Admin NewPing Test Status Device InformationVoIP Status CDR Status VPN Status Network Status System Log Help Help MenuConfiguration through IVR Frequently Asked Questions Why can’t I access the web-based configuration utility?What can I do if I forgot my password? How can I check if my IP address is correct for logging in?How can I set my computer to use a static IP address? Can I use my DVG-2101S on a Mgcp network?Technical Specifications FCC EMI Statement FCC Caution
Top Page Image Contents