D-Link DVG-2101S PPPoE, Password, Check, Service Name, Idle Time, Out, Auto, Reconnect

Page 17

Setup

DVG-2101S User Manual

PPPoE

Choose PPPoE (Point-to-Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. Most DSL users will select this option.

PPPoE User Enter the PPPoE user name supplied by your ISP.

Name	Enter the PPPoE password supplied by your ISP.
PPPoE	Enter the PPPoE password supplied by your ISP.
Password	Retype the password entered in the previous field.
Check	Retype the password entered in the previous field.
Password	Enter the PPPoE Service Name (if supplied by your ISP).
PPPoE	Enter the PPPoE Service Name (if supplied by your ISP).
Service
Name	Set the specific period of time, in minutes, to disconnect from the
Idle Time
Out	ISP when no traffic is passing through. The setting 0 minute
	means the VoIP adapter will never disconnect from the ISP.
Auto	Check this checkbox to allow the VoIP Adapter to re-establish the
Reconnect	connection if it is terminated by the ISP. However, if the
	connection is terminated under any other conditions (i.e. by Idle
	Timeout or manual disconnect), the VoIP Adapter will not re-
	establish the connection. This box is checked by default.
MTU	Enter the MTU (Maximum Transmission Unit) size. MTU is the
	largest size packet that can be sent by the device. If the network
	stack of any packet is larger than the MTU value, then the packet
	will be fragmented before the transmission. During the PPP
	negotiation, the peer of the PPP connection will indicate its MTU
	and will accept any value up to that size.

	15

Image 17

Contents DVG-2101S VoIP Telephone Adapter Table of Contents Introduction Package Contents„ NTP Features„ VPN Front Panel Power LEDPhone LED Register LEDRear Panel Reset ButtonConnecting the DVG-2101S Directly to a Modem Hardware InstallationConnecting the DVG-2101S Behind a Router Hardware Installation Enter or Return key ConfigurationStep Click Setup WizardStatic IP users have to set the DNS address Click Next Step Internet Setup SetupConnection Type Dynamic IPStatic IP Service Name PasswordName PPPoEClone MAC Address CloneStatic Routing SIP Account List VoIP SetupNumber Phone BookTime and Date Internet Time Zone Enable Daylight Saving DatesAdvanced VoIP SettingsCall Feature Scenario Examples of Making a Conference CallSIP Setting Digit Plan Component Description Digit Plan Syntex To specify a Enter the following ResultIVR Digits InputScenario Rule Combination VoIP Adapter will do… Digit MapMode PrefixMin Len ExampleDial Prefix Priority CodecCodec PacketizationPhone Setting DNS Server Address Host Name Username or Key Timeout StatusDynamic DNS QoS VPN Dialing out SettingsLAN Mask System MaintenanceConfiguration Times Period File Auto ProvisionSnmp for Snmp model only Log Setting Firmware Update Admin Current Password Admin New Access ControlPing Test Device Information StatusVoIP Status CDR Status VPN Status Network Status System Log Help Menu HelpConfiguration through IVR Why can’t I access the web-based configuration utility? Frequently Asked QuestionsHow can I check if my IP address is correct for logging in? What can I do if I forgot my password?Can I use my DVG-2101S on a Mgcp network? How can I set my computer to use a static IP address?Technical Specifications FCC Caution FCC EMI Statement