D-Link DVG-2101S user manual Front Panel, Power LED, Phone LED, Register LED, Provision LED

Page 6

DVG-2101S User Manual

Introduction

Front Panel

Power LED

This LED will light solid when the device finishes a self-test and booting up. This LED will flash during device self-test and booting and light off if the self-test fails.

Phone LED

This LED will light solid when the telephone is off-hook. A fast blinking LED indicates an incoming call and a slow blinking LED indicates a message is waiting. This LED will light off if the phone connected to the phone port is on-hook.

Register LED

This LED will light solid if the phone account registers successfully. This LED will flash during registering and light off if registering fails.

Provision LED

This LED will light solid if the device provisions successfully. This LED will flash during provisioning and light off if provisioning fails.

WAN LED

This LED will light solid when a connection is established and blink to indicate activity. If this LED does not light up when a cable is connected, verify the cable connections and make sure your devices are powered on.

4

Image 6

Contents DVG-2101S VoIP Telephone Adapter Table of Contents Package Contents IntroductionFeatures „ NTP„ VPN Phone LED Power LEDFront Panel Register LEDReset Button Rear PanelHardware Installation Connecting the DVG-2101S Directly to a ModemConnecting the DVG-2101S Behind a Router Hardware Installation Configuration Enter or Return keyClick Setup Wizard StepStatic IP users have to set the DNS address Click Next Step Connection Type SetupInternet Setup Dynamic IPStatic IP Name PasswordService Name PPPoEMAC Address Clone CloneStatic Routing VoIP Setup SIP Account ListPhone Book NumberInternet Time Zone Enable Daylight Saving Dates Time and DateVoIP Settings Call FeatureAdvanced Examples of Making a Conference Call ScenarioSIP Setting Digit Plan Digit Plan Syntex To specify a Enter the following Result Component DescriptionDigits Input IVRDigit Map Scenario Rule Combination VoIP Adapter will do…Min Len PrefixMode ExampleDial Prefix Codec CodecPriority PacketizationPhone Setting DNS Timeout Status Dynamic DNSServer Address Host Name Username or Key QoS Dialing out Settings VPNLAN Mask Maintenance ConfigurationSystem Auto Provision Times Period FileSnmp for Snmp model only Log Setting Firmware Update Access Control Admin Current Password Admin NewPing Test Status Device InformationVoIP Status CDR Status VPN Status Network Status System Log Help Help MenuConfiguration through IVR Frequently Asked Questions Why can’t I access the web-based configuration utility?What can I do if I forgot my password? How can I check if my IP address is correct for logging in?How can I set my computer to use a static IP address? Can I use my DVG-2101S on a Mgcp network?Technical Specifications FCC EMI Statement FCC Caution