GENERAL FEATURES
A power
Proceed (Clear-To-Talk) Tone
This is a short tone that sounds shortly after the PTT switch is pressed to indicate that the radio system has been accessed and speaking can begin. This tone can be programmed so that it sounds on LTR systems but not conventional systems. In addition, this and other tones can be disabled on all systems by the TONES menu parameter (see “Tone Select” on page 30) or system operator programming. Either a standard or loud
On LTR systems, if the radio system is busy when making a call, the busy tone sounds instead of the proceed tone and “BUSY” is indicated on the bottom line of the display. If the PTT switch is held down, the system is accessed and the proceed tone sounds when it is no longer busy. If an
On conventional systems, the Transmit Disable On Busy feature can be used to automatically perform monitoring (see page 44). The proceed tone then does not sound if the channel is busy. Otherwise, the proceed tone (if enabled) sounds on conventional systems even if the channel is busy.
With all operating modes, if encryption is used, a
28