EFJohnson LTR 98xx, High Tier manual Safety Information

Page 4

SAFETY INFORMATION

SAFETY INFORMATION

The FCC has adopted a safety standard for human exposure to RF en- ergy. Proper operation of this radio under normal conditions results in user exposure to RF energy below the Occupational Safety and Health Act and Federal Communication Commission limits.

WARNING

DO NOT allow the antenna to touch or come in very close proximity with the eyes, face, or any exposed body parts while the radio is trans- mitting.

DO NOT operate the transmitter of a mobile radio when a person out- side the vehicle is within one (1) meter of the antenna.

DO NOT operate the transmitter of a stationary radio (base station or marine radio) when a person is within one (1) meter of the antenna.

DO NOT operate the radio in explosive or flammable atmospheres. The transmitted radio energy could trigger blasting caps or cause an explosion.

DO NOT operate the radio without the proper antenna installed.

DO NOT allow children to operate or play with this radio.

NOTE: The above warning list is not intended to include all hazards that may be encountered when using this radio.

This device complies with Part 15 of the FCC rules. Operation is sub- ject to the condition that this device does not cause harmful interfer- ence. In addition, changes or modifications to this equipment not expressly approved by the E.F. Johnson Company could void the user’s authority to operate this equipment (FCC rules, 47CFR Part 15.19).

4

Image 4

Contents High Tier Operating Manual Page Page Safety Information FCC Exposure Limits Limits For General Population/Uncontrolled ExposureFrequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide Features General FeaturesControls and Display Front Panel ControlsMicrophone Push-To-Talk PTT Switch Not Shown Push-button on Rear Panel Jacks and Connectors Display Description Determining Volume Level Power-Up SequenceGeneral Operation Numeric Display Mode Alpha Tag Display ModeBacklight Operation System/Group Display InformationSelect Mode Indication With Alpha Tag Display Select Mode Indication With Numeric DisplaySelecting the System and Group Setting Squelch Control Standard Calls IntroductionPlacing a Standard Call LTR OperationConventional Operation Receiving a Standard CallTelephone Calls Placing Telephone CallsReceiving a Telephone Call Landside-Originate Calls General FeaturesBank Select Emergency Switch Call IndicatorEncryption Encryption Indicator Function FCN SwitchHome System/Group Select Horn AlertPower Turn-Off Delay Option SelectProceed Clear-To-Talk Tone Time-Out Timer Stealth ModeReceive-Only Groups Option Switches and Menu Mode Option SwitchesTone Select Transmitter Thermal FoldbackMenu Mode and Option Switch Functions SwitchMenu Mode Introduction Using Menu ModeSystem and Group Scan System and Group Scan Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeSystem and Group Scan LTR and Conventional Modes GeneralMonitoring Conventional Channels Before Transmitting Standard and Telephone Calls LTR FeaturesCalls on Priority and Block ID Codes Transmit Inhibit Busy Queuing System SearchTranspond Monitor Mode Conventional FeaturesTransmit Disable On Busy Talk-Around Call Guard Squelch Priority Group SamplingMiscellaneous Supervisory TonesMiscellaneous LTR Telephone Call Tones Display Messages Miscellaneous Menu Mode Messages Bright DIM OFFSystem Operator Programming Speaking Into MicrophoneOperation At Extended Range Preventing Battery DischargeLicensing Transceiver Service