EFJohnson High Tier, LTR 98xx manual Scan List Programming

Page 35

SYSTEM AND GROUP SCAN

Scan List Programming

General

NOTE: The selected (displayed) system and group are always scanned, even if they are deleted from the scan list.

The system and group scan lists are programmed using the A/D (add/delete) option switch. Pressing this switch changes the status of the displayed system or group. The displayed system is in the scan list and

scanned normally when is displayed. Likewise, the displayed group is

in the scan list and scanned normally when is displayed (see preceding illustration).

The system/group select mode described on page 17 also controls if the system or group scan list is changed when the A/D switch is pressed. For example, to change the scan list status of the displayed system, press the Select switch if necessary so that the system select mode is indicated and then press the A/D switch.

Deleting a system only temporarily deletes the groups associated with that system. When a system is added back into the scan list, the orig- inal group scan list is again active. Systems and groups can be deleted from the scan list while listening to a message on the system or group by pressing the A/D switch in the normal manner. Scanning resumes shortly after the system or group is deleted.

Scan list programming is not available if the A/D switch is disabled. In addition, the group scan list is not programmable if the group scanning is disabled on the current system. If an attempt is made to program the group scan list on one of these systems, a beep sounds, “GSCN DIS” is flashed in the display, and no change occurs in the scan list.

Saving Scan List

If the menu mode SCN SAVE parameter is available, you can select if scan list changes are saved. If “On” is selected, changes are saved as they are made and the scan list is the same when power is turned on. If

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents High Tier Operating Manual Page Page Safety Information Limits For General Population/Uncontrolled Exposure FCC Exposure LimitsFrequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide General Features FeaturesFront Panel Controls Controls and DisplayMicrophone Push-To-Talk PTT Switch Not Shown Push-button on Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level System/Group Display Information Numeric Display ModeAlpha Tag Display Mode Backlight OperationSelecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch Control LTR Operation Standard CallsIntroduction Placing a Standard CallReceiving a Standard Call Conventional OperationPlacing Telephone Calls Telephone CallsReceiving a Telephone Call Bank Select General FeaturesLandside-Originate Calls Encryption Call IndicatorEmergency Switch Function FCN Switch Encryption IndicatorHorn Alert Home System/Group SelectOption Select Power Turn-Off DelayProceed Clear-To-Talk Tone Receive-Only Groups Stealth ModeTime-Out Timer Transmitter Thermal Foldback Option Switches and Menu ModeOption Switches Tone SelectSwitch Menu Mode and Option Switch FunctionsUsing Menu Mode Menu Mode IntroductionSystem and Group Scan System and Group Scan Scan List Programming Transmitting In The Scan Mode Scan Delay and Continue TimersSystem and Group Scan General LTR and Conventional ModesMonitoring Conventional Channels Before Transmitting Calls on Priority and Block ID Codes LTR FeaturesStandard and Telephone Calls Transmit Inhibit System Search Busy QueuingTranspond Transmit Disable On Busy Conventional FeaturesMonitor Mode Talk-Around Priority Group Sampling Call Guard SquelchSupervisory Tones MiscellaneousMiscellaneous LTR Telephone Call Tones Display Messages Miscellaneous Bright DIM OFF Menu Mode MessagesSpeaking Into Microphone System Operator ProgrammingLicensing Preventing Battery DischargeOperation At Extended Range Transceiver Service
Top Page Image Contents