EFJohnson LTR 98xx, High Tier manual Menu Mode Introduction, Using Menu Mode

Page 32

OPTION SWITCHES AND MENU MODE

Menu Mode Introduction

The menu mode is selected by pressing the FCN switch twice. If this switch is not programmed, the menu mode is not available. Functions which can be controlled by the menu mode are indicated by an entry in the “Menu Items” column of the table on page 31. Refer to the page listed in the table for a description of the function. Some functions may not be used, may be in a fixed state, or may be controlled by an option switch. The menu parameter that controls that function is then not displayed.

Using Menu Mode

To use the menu mode, proceed as follows:

1.To select the menu mode, press the FCN switch twice. The menu display follows. The top line indicates the function being edited, and the bottom line indicates the current status of that function.

Function

Status

2.To display the various functions that are controllable by the menu mode (top line indication), rotate the Select switch. The currently selected status of that function is displayed on the bottom line.

3.To change the selected status, press the Select switch. The selections displayed for each menu function are shown on page 52.

4.To display another menu function, rotate the Select switch. Then change the status if desired as described in the preceding step.

5.The selected status conditions for the various functions are saved when the menu mode is exited in one of the following ways:

32

Image 32

Contents High Tier Operating Manual Page Page Safety Information FCC Exposure Limits Limits For General Population/Uncontrolled ExposureFrequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide Features General FeaturesControls and Display Front Panel ControlsMicrophone Push-To-Talk PTT Switch Not Shown Push-button on Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level Numeric Display Mode Alpha Tag Display ModeBacklight Operation System/Group Display InformationSelecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch Control Standard Calls IntroductionPlacing a Standard Call LTR OperationConventional Operation Receiving a Standard CallTelephone Calls Placing Telephone CallsReceiving a Telephone Call Bank Select General FeaturesLandside-Originate Calls Encryption Call IndicatorEmergency Switch Encryption Indicator Function FCN SwitchHome System/Group Select Horn AlertPower Turn-Off Delay Option SelectProceed Clear-To-Talk Tone Receive-Only Groups Stealth ModeTime-Out Timer Option Switches and Menu Mode Option SwitchesTone Select Transmitter Thermal FoldbackMenu Mode and Option Switch Functions SwitchMenu Mode Introduction Using Menu ModeSystem and Group Scan System and Group Scan Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeSystem and Group Scan LTR and Conventional Modes GeneralMonitoring Conventional Channels Before Transmitting Calls on Priority and Block ID Codes LTR FeaturesStandard and Telephone Calls Transmit Inhibit Busy Queuing System SearchTranspond Transmit Disable On Busy Conventional FeaturesMonitor Mode Talk-Around Call Guard Squelch Priority Group SamplingMiscellaneous Supervisory TonesMiscellaneous LTR Telephone Call Tones Display Messages Miscellaneous Menu Mode Messages Bright DIM OFFSystem Operator Programming Speaking Into MicrophoneLicensing Preventing Battery DischargeOperation At Extended Range Transceiver Service