EFJohnson LTR 98xx, High Tier manual Display Messages

Page 50

MISCELLANEOUS

Display Messages

The following messages appear on the upper or lower line of the display to indicate various operating modes and error conditions. The group alpha tag appears in this area during normal operation.

BLK CALL - Indicates that the call is being received on an LTR block ID code (see “Calls on Priority and Block ID Codes” on page 40).

BUSY - Indicates that the LTR radio system is currently busy (see “Busy Tone” on page 47).

CG ON or OFF - Indicates that Call Guard squelch was just enabled or disabled by the CG option switch (see “Monitor Mode” on page 44).

DSBL BSY - Indicates that the transmitter is disabled by the conven- tional Transmit Disable On Busy feature (see page 44). It also indicates that the transmitter was keyed while receiving an LTR call.

EMERGNCY - Indicates that the emergency switch has been pressed (see “Emergency Switch” on page 24).

FCN - Indicates that the function select mode is selected by the FCN option switch (see page 25).

GSCN DIS - Indicates that an attempt was made to delete a group from the scan list with group scanning disabled (see “Scan List Programming” on page 35).

IN QUEUE - Indicates that the call has been placed in queue by the LTR Busy Queuing feature (see “Busy Queuing” on page 42).

Model - The last seven digits of the transceiver part number are indicated very briefly on the top line of the display when transceiver power is turned on. This number indicates such things as frequency band, power output, and tier of the transceiver. The eighth digit is reserved and always “0”.

50

Image 50

Contents High Tier Operating Manual Page Page Safety Information FCC Exposure Limits Limits For General Population/Uncontrolled ExposureFrequency Whip Model No Base Model No Table of Contents Table of Contents Quick Reference Guide Features General FeaturesControls and Display Front Panel ControlsMicrophone Push-To-Talk PTT Switch Not Shown Push-button on Rear Panel Jacks and Connectors Display Description General Operation Power-Up SequenceDetermining Volume Level Backlight Operation Numeric Display ModeAlpha Tag Display Mode System/Group Display InformationSelecting the System and Group Select Mode Indication With Numeric DisplaySelect Mode Indication With Alpha Tag Display Setting Squelch Control Placing a Standard Call Standard CallsIntroduction LTR OperationConventional Operation Receiving a Standard CallTelephone Calls Placing Telephone CallsReceiving a Telephone Call Bank Select General FeaturesLandside-Originate Calls Encryption Call IndicatorEmergency Switch Encryption Indicator Function FCN SwitchHome System/Group Select Horn AlertPower Turn-Off Delay Option SelectProceed Clear-To-Talk Tone Receive-Only Groups Stealth ModeTime-Out Timer Tone Select Option Switches and Menu ModeOption Switches Transmitter Thermal FoldbackMenu Mode and Option Switch Functions SwitchMenu Mode Introduction Using Menu ModeSystem and Group Scan System and Group Scan Scan List Programming Scan Delay and Continue Timers Transmitting In The Scan ModeSystem and Group Scan LTR and Conventional Modes GeneralMonitoring Conventional Channels Before Transmitting Calls on Priority and Block ID Codes LTR FeaturesStandard and Telephone Calls Transmit Inhibit Busy Queuing System SearchTranspond Transmit Disable On Busy Conventional FeaturesMonitor Mode Talk-Around Call Guard Squelch Priority Group SamplingMiscellaneous Supervisory TonesMiscellaneous LTR Telephone Call Tones Display Messages Miscellaneous Menu Mode Messages Bright DIM OFFSystem Operator Programming Speaking Into MicrophoneLicensing Preventing Battery DischargeOperation At Extended Range Transceiver Service